Gold Dipped Drop Leaf Table Makeover

Over a year ago I bought this little number off of Kijiji. When I received it, the top had more damage to the veneer than I anticipated, and I knew it was going to take a big effort to update, so it sat… For over a year, until the right person just happened to notice it in this photo I posted on my Instagram.

You can hardly see it and it’s details on the left hand side of this photo but my customer had an eye for pretty things!

Here it is before I got to work, it really became a catch all in my garage… so neglected ūüė¶

¬†I have never stripped veneer off of furniture before, but I knew it could be a challenge. ¬†So I got out some high grit stand paper and a flat knife and began peeling. ¬†I peeled with the knife what I could and oh how satisfying it was to peel off a big chunk of veneer, but there were moments where I fully had to sand down the veneer – two and a half later I had finished just the middle section! ūüė≥
I missed taking pictures of this process, as I was fully focused on the grunt work.  But once I had it smooth and sanded, i moved onto sanding those legs.

I needed a break from the top, so after sanding down and prepping the legs I used my favourite gold spray paint and lightly added layers of gold, letting fully dry before each coat. ¬†Once the spray paint had fully dried, i measured and taped off where I wanted the legs to be dipped to and began painting the rest of the base. ¬†I primed each step with Zinssers stain blocker. ¬†When you’re tackling really old furniture it’s almost a guarentee that it will bleed, especially if veneer is involved and your bright white colour (or whatever colour you’re using) will dry to have a gross yellow look to it – and no matter how many coats of paint, it wont go away. ¬†So you’ll save paint, time and your sanity if you just use a primer/stain blocker from the get go! ¬†¬†The veneer was in really good condition on the actual drop leafs and since I was painting the whole thing I ended up leaving that veneer and just sanded it down. ¬†Although I was using chalk paint, sometimes it’s still necessary to sand furniture. ¬†I much prefer to sand down old surfaces to get the years of grease, and grime off rather than scrubbing it down! ¬†During this process there were a couple edges that I had to fill with wood filler and smooth out, but that’s a much easier process than stripping the veneer!

Here’s a quick shot of the table flipped and the coats of the stain blocker and fat paint. ¬†Being a drop leaf, I had to make sure the underneath looked just as pretty as the top! ¬†I did end up lightly painting the hinges too, but just lightly so that they wouldn’t lock up.

Once I flipped her back over, i finished the table tops using a couple coats of stain blocker and a couple coats of Warm White Fat Paint. ¬†I do use a synthetic bristle brush when using chalk paint – as a roller soaks up and wastes so much. ¬†So I do end up with some brush strokes. ¬†My secret to smoothing down brush strokes is using a slightly damp sanding sponge between coats. ¬†Make sure your paint is fully dry before doing so, and lightly sand over your surface wiping as you go. ¬†It creates such a nice buttery finish. ¬†I used multiple coats of General Finishes Flat Top Coat on the entire piece. ¬†It goes on so nicely and provides such a great top coat. ¬†It’s my favourite!



I had the table finished for a couple days and it was just hanging out in my garage before i could deliver it and I thought it needed a special touch.  So I used my Silhouette Cameo to add a special little pop inside the drawer.

Please ignore my terrible garage shoes – i’ve stolen them from my hubby – and they’re awesome and terrible lol.

Now this wonderful piece is in it’s new home over at Greater Goods¬†and it’s so perfect in this space. ¬†It was such a pleasure to make something for them to display so many local pretties on! ¬†This labor of love was 100% worth the work!!



DIY Floral Monogram

It’s been quite the week. ¬†Sick kids, appointments to the allergist, and respiratory specialist, a visit to the walk in clinic, passport office, medicine three times a day for one, puffers two times a day for the other, orders to finish and to be picked up, and then on top of it I hosted three small online garage sales!
It got to the point today, where I just wanted to start and finish something just because – just because I wanted to! ¬†So I did, and believe you me, craft therapy is real! ¬†The Lord just knew what I needed! ¬†After dropping my biggest little at the bus, my littlest little fell asleep in the car, and transferred to his bed without a hitch! ¬†I brewed myself some (more) coffee, turned on Netflix and got my craft on! ¬†I’m so happy with how it turned out so I figured I’d share it all with you in what appears to be my quarterly blog! ¬†I didn’t take a million tutorial pictures along the way, but I’ll share with you what I know! ¬†First things first. ¬†Michaels has a BOGO sale going on for all of their floral stems! ¬†So I bought all of these – regular $49 for $25!


Gotta love a sale like that. ¬†And if there was no sale, there would’ve been no crafting for me today, and I wouldn’t have this post successful craft high that I’m on right now!

Next I took my wire cutters and snipped off all those pretty flowers and some of the leaves that I would use for filler – and then took a picture of it – cuz gosh these are some pretty fake flowers!
As my hot glue gun warmed up, I found an old diaper box kicking around and just free hand drew a letter R (for our last name) and took an exacto knife and carefully cut it out. ¬†I tried my best to make it proportionate and straight, but true story – i’m not a perfectionist, and i knew these flowers would hide any of my crazy cutting skills. ¬†In case you’re wondering how my letter looked before I covered it with pretty flowers, well i forgot to take a picture. ¬†But I did just snag a pic of the left over diaper box. ¬† Not the worst R in the world hey?IMG_1076.jpg

Then I got hot glue gun happy! ¬†First I grabbed some super glittery ribbon I had kicking around and wrapped a loop around the top of the R for hanging. ¬†After that I didn’t really have a method to my madness, and no pictures to show what I did… I just filled and made it up as I went. ¬†I did however, first place my larger peonies scattered evenly throughout the R, and then went to my medium flowers, and then filled in spaces with smaller flowers, baby breath and finished by gluing the leaves under flowers, I also glued little flowers over top of the leave so they were a little hidden… So i guess I did have a bit of method to my madness! ūüėõ¬†IMG_9558

And well Voila! ¬†I’m so happy with how it turned out. ¬†It’s so springy and happy, and makes this chaotic week that we just went through not feel so bad! ¬†I currently have it hanging outside on my front door, but I’m actually considering bringing it in and incorporating it into my gallery wall. ¬†We’ll see. ¬†I don’t trust Calgary weather to be very nice to it, and if it’s hanging inside I’ll get to stare at it all the time. ¬†Ok, I convinced myself, it’s coming in!

Here are a few pics of the finished product!

IMG_1083IMG_9536IMG_9552Hope you enjoyed! ¬†Hope to see you back here before July!! ¬†Have a great weekend ūüôā
XOXO Meryl

Retro Grunge Hutch

I’ve been really slack on my blogging game lately. ¬†I have so much to share with you all about makeovers and different projects and then another project comes up and blogging gets put on the back burner. ¬†Well this morning I figured I’d share my hutchmost recent furniture transformation.

A customer dropped off a hutch that she was less than thrilled about, she said it was boxy, boring, meh and ugly but hoped that it could be revived with a facelift!  Here it was before, she was right, pretty boring and boxy, but look at that retro goodness!  It was full of potential!

IMG_7232First I removed all the doors and gave the whole piece a sand down. ¬†You don’t have to sand down the raw wood, I’d still be there sanding if that was the case. ¬†You want to get as much of that glossy finish off so that the paint has something to stick to! ¬†Once you sanded it down give it a good wipe. ¬†I used a paint & primer so after it was dust free I got right to work. ¬†For big pieces like this with clean lines I like to use a roller (especially if I’m NOT using chalk paint – i find a brush is a better way to apply chalk paint.) you’ll get nice smooth application with no brush strokes.

So here’s the piece all nice and painted. ¬†Looks ¬†nice and clean and already was such a major transformation. ¬†But my client wanted some more depth… grunge if you will!!! ¬†I was more than excited to mIMG_7449ake that happen, and just knew it would give this piece that wow factor. ¬†I used Ralph Lauren Faux Glaze mixed with about a teaspoon of black paint and began the glazing process. ¬†Applying, then wiping off with a wet cloth. ¬†At some points to get the level of glaze I wanted on the piece I would just dry brush the glaze on. ¬†Here’s a picture of the difference!


We loved the idea of adding some brightness to this dark piece, but it also needed to have some grunge to it!  (forgive the crooked picture!)
IMG_7457After everything was glazed and good, I added some General Finishes Flat Top Coat. ¬†It’s my fave! ¬†Here’s the finished project!!!

IMG_7474 IMG_5889 IMG_5894

Hopefully I’ll be back soon with some other projects I’ve been working on while prepping for a Christmas market! ¬†Have an awesome Wednesday!
xo Meryl
Inspired Findings

DIY Wood Plank World Map

I’ve been meaning to blog this for pretty much a month now! ¬†Sorry this is so late! ¬†I’ve had a lot of questions about how I did this large world map. ¬†It’s no secret that I use the Silhouette Cameo to cut stencils for projects like this, but the catch is, the Cameo only cuts 12″ wide. ¬†So basically I had to design and cut this like a puzzle in many (i think 4 or 5) sections.

Before I geIMG_4052t into those details, I just wanted to share quick how I did these wood planks that were old fence boards once upon a time. ¬†First after cutting the boards I drilled holes on each side. ¬†Then i stained some of the boards with grey stain and some with antique walnut both by Minwax. ¬†Once they were dry I used FAT’s dark wax over the boards and concentrated it in the drill holes to make it look like it wasn’t freshly drilled. ¬†so Voila! ¬†i was so happy with how these old fence boards turned out!

So back to where it all started. ¬†First thing first. ¬†I had my map shape on the Silhouette Studio and sized my board to be the size I wanted my sign to be. ¬†I have a 12×24 cutting map so once I measure out the size of map that I wanted I began cutting the map into 12×24″ pieces using the knife tool. ¬†Then I copy and pasted the rest of the map that didn’t fit on the 12×24 page to a new page and continued to do so until it was all ready to cut on about 4 or 5 separate pages! ¬†I hope that makes sense!

Once everything was cut on vinyl I pealed away the landmasses and used the outline as my stencils.  It was tricky measuring out and piecing the puzzle together evenly, but it just takes patience and attention to detail.  I had my computer with the full map open so I could keep referring back to it as I laid my pieces over the wood sign.   I trimmed down my stencils that were still attached to transfer paper and then taped the upper and lower pieces of each land mass together from underneath, mainly to keep the pieces together and be able to space everything out properly.

IMG_6918IMG_6587 2

Here’s how it looked once I had it all stuck to the boards!


From there I made sure to seal the inside edges with mod podge that I thinned down with water a little bit.  Once that was dry I applied a couple layers of white paint, and when the paint was still a little bit wet I peeled the vinyl away!  Sometimes little bits of your paint might peel up with your vinyl or some of the paint might bleed (especially if your wood is bumpy or uneven) but thats an easy touch up with either a paint brush or a light sanding.  To finish the project i did do a light sand over the land masses to distress them a bit and then I applied a dark brown wax to make the land masses not so stark white, but more worn in with the boards.

Wood Plank World Map

So there you go!!! ¬†I hope that was clear! ¬†I likely missed something and I hope it wasn’t too confusing! ¬†Please ask questions if you have any and I’ll do my best to answer them! ¬†A lot of times I just make things up as I go but I’m always willing to share my methods!!!
Thanks for reading!

The Dirt on MudPaint

A few weeks ago I stumbled on the Instagram account @mudpaint. ¬†I’m not even sure how I got there, isn’t that the crazy web that Instagram weaves!? ¬†One follow leads to suggested users and clicking on hashtags and suddenly your liking a picture of a cat from a guy in Norway. ¬†Anyways, I ended up checking out Mud Paint and was so excited to see their beautiful transformation pictures and was almost giddy when reading about their claim for better coverage and smoother finish than other furniture paint on the market. ¬†I needed to get my hands on this paint! ¬†So graciously they sent some from sunny California to pretty sunny (not as warm) Calgary, Canada. ¬†As soon as my hubby got home I dusted off an old piano bench that I picked up from GoodWill a couple weeks ago and got to work!

I gave the top a light sanding as they suggest, but lIMG_1974et’s be honest, other peoples gunk freaks me out, especially when there’s crusty, old, stuck on gunk…. i just can’t handle it! ¬†I guess the quicker option would be to wash it off but I just feel better hiding behind a sanding sponge, and it’s the best way to prep your piece so it works out! ¬†So, I gave it a quick sand and THEN I wiped it down.

Here’s where I got a little excited. ¬†The¬†whole concept of just one coat on a piece of furniture kinda threw me for a loop. ¬†I guess subconsciously I put on quite the thick layer. ¬† It went on great and let me tell you the coverage was shocking. ¬†Really just one coat gave amazing coverage, just like they claim. ¬†I did touch up some brush strokes and likely didn’t wait the appropriate dry time. ¬†Here’s a pic after the one and only coat plus a couple touch ups – as you can see I hadn’t even painted the bottom of the legs yet, I was that excited about the coverage.


To my surprise – and let me be real – delight – as the piece began to dry the paint began to crackle. ¬†This was super exciting to me, but also had me curious as to why, I didn’t expect it… thankfully it works for this piece, but I don’t think it was supposed to happen. ¬†So I just carried on and went onto distressing and finishing the piece.

IMG_2020IMG_2035 IMG_2030IMG_2019

Even before I began to distress the piece I noticed the smooth finish. ¬†It wasn’t the same chalky, matte finish that most chalk paints have, this was smooth and only made smoother with my handy dandy sanding sponge! ¬†Distressing was a dream.


WhIMG_2061o doesn’t love a pop of colour? ¬†I love a good ol’ drawer or compartment to sneak a little colour into a classic piece. ¬†I painted the inside of the piano bench with some homemade chalk paint – a go to when I’ve found a pretty colour of flat paint in the clearance section of the paint store!
I have been in touch with the sweet people who sent me this glorious MudPaint to see if they had any idea of why we got this beautiful crackle and I’m pretty sure that it has a lot to do with my eager beaver thick coat of paint I put on theIMG_2062 piece. ¬†A quick solution would be to lightly sand and reapply a thinner coat, but I decided to leave the crackles on this piece! ¬†I have a piece lined up to give another go with a more of a conservative coat planned. ¬†I’ll keep you all posted on what becomes of that!

Long story short….ish…. I’m super happy with this paint! ¬†I wasn’t sure if I could believe all the claims, but the coverage – amazeballs, and the finish – smooth as butter! ¬†The customer service has been great too! ¬†Thanks so much MudPaint, I can’t wait to get my hands on Charcoal Black next!!!